Are you looking to add a final touch of elegance to your interior home? Skirting boards are the perfect choice that can give a finishing touch to any room. If well-installed, skirting boards can provide a seamless transition between the walls and the floor. From measuring and marking to using a miter saw, this guide will take you through the step-by-step process of skirting board cutting process. Along the way, it will share expert tips and tricks to ensure your skirting boards fit perfectly and add that extra style to your home. So, grab your tools and transform your space with beautifully cut skirting boards.

Tools and Materials You’ll Need

Before beginning the journey to cut skirting boards, you must ensure you have the most vital tools to do your job. Some of the tools to own or rent include:

• Skirting boards
• Measuring tape
• Pencil
• Miter saw and backsaw
• Coping saw
• Sandpaper
• Wood glue
• Clamps
• Safety goggles and dust mask

Having the right tools makes cutting and installing skirting boards enjoyable. However, it’s crucial to prioritize safety.

Step-by-Step Procedure

Here’s a more detailed step-by-step guide on how to cut skirting boards as a complete beginner:

Measure and Mark

Measure the wall length where you want to install the skirting board. Mark the measurements on the skirting board itself using a pencil.

Cut External Corners

You’ll need to make a miter cut for an external corner. At an angle of 45 degrees Set your miter saw and place the skirting board against the saw fence and align the mark you made with the blade. Cut the skirting board, ensuring that the longer side of the miter is on the back side of the board. 

Cut Internal Corners

Internal corners can be trickier. For these, you’ll use a coping saw. Make a 45-degree miter cut on the first skirting board, as you did for the external corner. Use the coping saw to cut along the profile of the mitered end carefully. It will create a shape that fits snugly against the first skirting board, giving you a clean joint.

Dry Fit

Place the cut skirting boards in their respective positions to check how they fit together. Make any necessary adjustments to the cuts for a precise fit.

Cut Straight Joints

You’ll need to make straight cuts if you have a straight wall. Measure the length and make a square cut using a miter saw or a handsaw.

Fine-Tuning

After making the cuts, use sandpaper to smooth any rough edges or surfaces.

Gluing and Fixing

Apply wood glue to the back of the skirting board and press it against the wall. Hold it in place using a clamp and allow the glue dry. Wipe off any excess glue immediately. After the glue dries, use wood filler to cover gaps or nail holes. Ensure you sand the served areas until they are smooth.

Conclusion

The bottom line is that skirting board cutting requires precision. Therefore, take your time and practice your cuts on scrap pieces of skirting board if you’re feeling uncertain. As you gain more experience, you’ll become more comfortable with the process and may develop your techniques.